Project Datto update

So yesterday I took the car out for a spin, so winter is officially over for the Datto.

But first things first, Here are 2 more modifications I did these last few weeks. I fitted new 3-point inertia safety belts (more on this later). And I fitted the 123 ignition distributor.


Yes, it’s a complete distributor, advance can be programmed via Bluetooth and the 123 app on your phone. Installation was straight forward, just go by the manual, easy peasy. Mount everything up
connect 2 wires
set the dizzy according to the 123 manual
hook up the 3rd wire
Put a cap on the dizzy and wire your spark wires according to the firing order and relative to the position of the dizzy finger after the installation.

So here are a few questions I had prior the installation and which I now can answer myself.
Will the tach still work?    Yes
Keep or ditch the coil ballast?      I used a new Bosch Red coil which has a primary resistance of 1.6 Ohm, so I kept the ballast. Works fine. If you are using a 3 Ohm coil, you might be able to ditch the ballast.
These are the advance curves I’m running from start, they might change slightly once I got more time to play with them.

 

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s